Blog affaire - Slackware

[Script] Suspend-to-[RAM|DISK]-Script mit Suspend 0.8 [µswsusp 0.8]

nospam@example.com (Mark Baumann) — Fri, 29 Aug 2008 22:14:52 +0200

Based on information found on the different pages in the net...

Previous article:
http://project-run.com/archives/7-haltrebootsuspend-to-ramdisk-fuer-jeden-user-freigeben.html

Package from slacky.eu:
http://www.slacky.eu/index.php?option=com_content&task=view&id=7829&Itemid=65

Original download:
http://suspend.sourceforge.net

#!/bin/sh

# Switch to console terminal to avoid graphics corruption in X:
chvt 1

# Flush all data to disk (just in case...):
pkill ssh &
pkill dhcpcd &
sync
echo 3 > /proc/sys/vm/drop_caches
swapoff -a

# Save the system time:
hwclock --systohc --utc

### Suspend:
## to RAM:
#echo -n "mem" > /sys/power/state
s2ram

## to Disk:
#echo -n "disk" > /sys/power/state
#s2disk

# Now we are sleeping...

# Reset the graphic card at resume:
sync
swapon -a &

#vbetool post
/etc/rc.d/rc.net &
echo powersave > /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor &

# Restore the system time:
hwclock --hctosys --utc

# Switch back to X:
chvt 7

#xrefresh

halt|reboot|suspend-to-[ram|disk] fuer jeden user freigeben

nospam@example.com (Mark Baumann) — Fri, 07 Sep 2007 14:56:00 +0200

Halt:

# chmod a=rwx,-s /sbin/halt
# chmod 4555 /sbin/halt

Suspend (echo [mem|disk] > /sys/power/state)

# chmod 777 /sys/power/state

Bezueglich syspend wird noch ein Script folgen.

HUAWEI HSPDA USB MODEM E220

nospam@example.com (Mark Baumann) — Wed, 25 Jul 2007 03:54:39 +0200

http://gentoo-wiki.com/HARDWARE_HUAWEI_E220_HSDPA_USB_MODEM

Zusammenfassung vom wichtigsten:

zgrep "CONFIG_USB_SERIAL_GENERIC" /proc/config.gz
zgrep "CONFIG_PPP" /proc/config.gz
zgrep "CONFIG_PPP_ASYNC" /proc/config.gz

Alles sollte modular sein...

Device Drivers --->
USB support --->
< M > OHCI HCD support

Device Drivers --->
Network device support --->
< M > PPP (point-to-point protocol) support
< M > PPP support for async serial ports

modprobe usbserial vendor=0x12d1 product=0x1003

Von http://www.kanoistika.sk/bobovsky/archiv/umts/ das c Programm runterladen...

gcc huaweiAktBbo.c -o huaweiAktBbo
mv huaweiAktBbo /mybin/

Aber man kann auch gleich eins der *.out Datein nehmen, und es mit dem Versuchen.

Das war mal vom Gentoo Wiki...

Falls die Nodes in /dev noch nicht dargestellt werden:

mknod /dev/ttyUSB0 c 188 0
mknod /dev/ttyUSB1 c 188 1
mknod /dev/ttyUSB2 c 188 2

Und so starte ich das Ganze:

#!/bin/sh
modprobe usbserial vendor=0x12d1 product=0x1003
huaweiAktBbo-i386.out
setpin
ifconfig eth0 down
ifconfig eth1 down
echo "nameserver 213.94.78.16 \nnameserver 213.94.78.17" > /etc/resolv.conf
xterm -title 'huawei status' he220stat &
wvdial hsdpa

Scripts und Configs unter Downloads...

pkg: sshfs|fuse - Kommentar

nospam@example.com (Mark Baumann) — Thu, 07 Jun 2007 23:35:54 +0200

Fehlermeldung:

fusermount: mount failed: Operation not permitted

Loesung:

# locate fuse.SlackBuild - Script vom Package suchen
# /usr/src/slackbuilds/fuse/fuse.SlackBuild - ausfuehren
# upgradepkg /tmp/fuse-2.6.5_2.6.20.2-i486-1mbox.tgz - installieren
# chmod 4755 /usr/bin/fusermount - Rechte richtig vergeben
# sshfs me@server: server - benutzen